Apple Mobile Device USB Driver Missing

When the drivers required in the iPhone for always attaching the device to the appropriate Windows are missing, the issue known as “Apple Mobile Device USB Driver Missing” occurs. These drivers are recognised to serve as the primary interface between the hardware and software. As a result, the system is able to run smoothly.

If it is not present in the system, the operating system will lag behind in the device interaction phase. Every device on the market must have its own set of drivers. You should only proceed with the data after installing the drivers. To fix this problem, start by installing the Apple device drivers. Manual mode should be used for this. Check to see if this step is beneficial to you.

Causes of Apple Mobile Device USB Drive

Apple’s mobile phone We are unable to locate the USB driver: The problem of invisibility only occurs when your system is unable to display the drivers that are all affiliated with Apple and also attached to the machine.

Apple’s mobile phone Device management is missing a USB driver: The issue appears as a warning to consumers that their Apple device was not detected by the device manager while they were attempting to connect to the computer. In general, it indicates a problem with the connection between your computer and your Apple device.

The Apple Mobile Device Service is not available: All Apple-related applications and software have their own built-in Windows service provider. These are used to make the software work. If there is a difficulty with the USB driver, the features will not be able to start at all.

How to Troubleshoot an Apple Mobile Device

Solution 1: For the USB Driver Missing Error is to double-check the connection of your Apple device.

Find out if the Apple device and your system are connected before we start working on the device management and manually installing the driver. If the driver or device isn’t visible, it’s because the attachment hasn’t been set up. Examine the data cables to see if they are transmitting data correctly and if they are functioning properly. According to a few complaints, the cables perform admirably during the charging process but fail miserably when it comes to transmitting data.

As a result, you will not have the ability to back up your iPhone. When the cable is working properly, you must adjust the port. It should be carried out in the location where your respective is connected to your system. You can also unplug the cable and then reconnect it with the system. Examine whether or not the device is visible.

Solution 2: Reinstalling the Apple Mobile Device USB Driver

When the system is already connected but the Apple device is still not recognised by the system, the reinstallation method always works. We’ve discussed the solutions to two procedures so far. Yes, both the Apple iTunes and Microsoft Store downloads are available. It is entirely up to you to decide. Follow the guidelines that have been provided.

If you want to continue the iTunes download through the Microsoft Store, follow these instructions:

Step 1: Disconnect all of the Apple device’s connections from the system. This can be accomplished by disconnecting the cable.

Step 2: You must unlock your Apple device’s lock. The home screen appears there. Re-establish your Apple device’s connection with the device’s screen wide open. If the iTunes window appears, we recommend that you close it immediately. Throughout the procedure, make sure the device you’re using is in the open state it needs to be.

Step 3: Press Windows + R to bring up the Run dialogue box. Then, in the text area, put “devmgmt.msc.” Now press the Enter key.

Step 4: The Device Manager appears on the screen. As a result, expand the Portables devices. After that, right-click on the Apple device option you’re using. Now press the Update driver button.

Step 5: Select “Search automatically for updated driver software” as the top option. It’s up to you to make the decision.

Step 6: Now that you’ve installed the improved version of the driver, go through the following steps: Windows Update may be found under Settings à Update and security à Windows Update. Keep your Windows up to date at all times. At the very least, attempt to meet this condition.

Step 7: Launch the iTunes programme that you just installed. Check to see if the problem is still present.

If you’re using Apple to download, follow these steps:

Step 1: Disconnect all of the Apple device’s connections from the system. Those cables can be unplugged.

Step 2: Switch on your Apple device. Establish a connection between your system and the Apple device on your home page screen. If the iTunes window appears, we recommend closing it for the time being. Throughout the procedure, make sure the device you’re using is in the open state it needs to be.

Step 3: Press Windows + R to bring up the Run dialogue box. Then put “% ProgramFiles% Common Files Apple Mobile Device Support Drivers” in the search box. Now press the Enter key.

Step 4: When the file explorer is available on the screen, the number of files will appear. Simply right-click on inf and usbaapl64.inf. Install should be selected.

Step 5: It’s critical that all of your files have the extension “.inf.” Follow the procedures outlined above to complete the installation.

Step 6: After you’ve finished installing your device, disconnect it. Then re-connect it. Start with iTunes to see if the problem has been rectified.

Solution 3: Restarting the Apple Mobile Device Service

Windows provides a service that runs Apple drivers throughout the system. This service also supervises the module and ensures that every function in your Apple device is carried out correctly by resolving any issues. This service provides the necessary interface for your Apple mobile devices. If the service is to blame for the problem, you’ll need to restart your system. Check to see if the problem remains. Follow these instructions as a guide for this procedure:

Step 1: Press Windows + R to bring up the Run dialogue box. Then, in the given text file, type “services.msc.” Press the Enter key.

Step 2: You’ve made it to the services. Look for the “Apple mobile device Service” service. Give it a right-click and then select Properties.

Step 3: To stop the service, first select Stop, then Start. Set the startup type to Automatic at all times.

Step 4: Attempt to connect the Apple gadget to your computer once more. Then launch iTunes. Check to see if the issue is still present.

Conclusion

All of the solutions are of high quality. If the problem persists, just erase the iTunes software from the device, as well as the device itself, while keeping Solution 1 in mind. Then reinstall them both. One more time, set up the attachment. As a result of the action you just took, the device’s default drivers will be installed. If the method fails to eliminate the issue, try connecting the Apple device to a different machine. You can also select a port modification option for your system.