how to

Kernel Security Check Failure Error In Windows 10

June 10, 2023

388

The occurrence of the Kernel Security Check stop code Several files failed during the compatibility or integrity check, resulting in failure. The only viable option is to replace or upgrade them. It has been discovered that the problem occurs when you update Windows to a new version while still using outdated drivers. Microsoft is recognised for offering its users with the best utilities, one of which is the SFC (System File Checker) scan. It is a programme that allows Windows users to search for and repair faulty or damaged system files.

Contents

1 Error: Kernel Security Check Failed in Windows 10
2 How to Resolve Kernel Security Check Errors
3 Method 1: Make the Legacy Advanced Boot Menu available.
4 Method 2: Run the System File Checker and Memory Diagnostics programmes.
5 Method 3: Examine the Memory Slot
6 Method 4: Check your hard drive
7 Method 5: Make sure your computer is up to date.
8 Method 6: Scan your computer
9 Method 7: Inspect your hard drive for errors.
10 Method 8: Failure of the Kernel Security Check after an overclock
11 Method 9: Perform a System Restore.
12 Method 10: Enable Safe Mode
13 Conclusion

Error: Kernel Security Check Failed in Windows 10

A large number of users have reported the well-known Kernel Security Check Failure Blue Screen of Death (BSOD)’ problem. We’ve covered why this mistake occurs and how to effectively solve it in this article.

There are a variety of reasons why this error occurs, including memory problems, virus infections, and so on. The most notable example is when you upgrade your Windows to a new version and certain of your system drivers are incompatible with some of the new capabilities. As a result, failures perform admirably.

Read Also:

As a result of this error, users may experience one of two outcomes: they may be able to log into their Windows 10 PC but receive the error “Kernel Security Check failure” Blue Screen of Death every now and then, or they may be unable to log in to their operating system because the system displays the error message whenever it is turned on. This is quite inconvenient for consumers that interact with their system on a regular basis.

How to Resolve Kernel Security Check Errors

To fix your problem, follow the steps outlined in this article.

Method 1: Make the Legacy Advanced Boot Menu available.

Step 1: To use this method, you’ll need a Windows 10 computer and an optical drive. Now restart your computer and place Windows 10 bootable media into the optical drive. If you’re having trouble figuring out how to make Windows 10 bootable media, click the link below to get started.

Visit https://Windowsreport.com/bootable-usb-stick-Windows-10-anniversary-update/ for more information.

Step 2: Next, on the Windows setup box, click Next.

Step 3: On the next page, look for the option to Repair your machine and select it.

Step 4: You will be prompted to select an option from the list of buttons; select Troubleshoot.

Step 5: Select Advanced options from the Troubleshoot section.

Step 6: Select Command prompt from the Advanced settings window and open it.

Step 7: At the command prompt, type C: and press Enter.

Step 8: As you can see, you’ve now entered the C drive. To enable the heritage advanced boot menu, type the command below and push enter.

BCEDIT/SET BOOTMENUPOLICY LEGACY BY DEFAULT.

Step 9: Once you’ve completed the needed instructions, quit the command prompt by typing EXIT and pressing enter.

Step 10: Finally, return to the previous ‘Choose an option’ screen and select Continue this time to restart your system normally.

If this solution didn’t seem to fix your problem, don’t panic; there are plenty more to try.

Method 2: Run the System File Checker and Memory Diagnostics programmes.

Step 1: Go to Settings > Advanced Startup and click the ‘See advanced repair options’ menu if you’re having difficulties starting your system regularly or if Windows 10 keeps failing every time you try to start it.

Step 2: Select Troubleshoot from the list of choices and press it.

Step 3: Next, go to Advanced Options and select Startup Settings from the drop-down menu.

Step 4: Click the Restart button on the bottom right side of the screen to restart the system.

Step 5: The system should reboot as a result of this.

Step 6: Once the computer has booted up, go to the top right corner of the screen and type cmd into the search box. Enter to complete the process.

Step 7: Right-click on the command prompt option for you and select Run as administrator. If you’re asked if you want to utilise Administrator rights, say yes.

Step 8: Finally, type sfc/scannow into the command prompt and press enter.

Step 9: This command will scan your system for any corrupted or damaged files and guide you through the process of repairing them.

Step 10: After the scanning procedure is completed. To exit the Command prompt window, type EXIT and press Enter.

Step 11: Hover the mouse over the search box in the top right corner of the screen once more.

Step 12: In the search box, type the word “memory” and select from the results. Select Windows Memory Diagnostic from the drop-down menu.

Step 13: Right-click the specified option and choose Run as administrator from the context menu. If you’re asked if you want to work with Administrator credentials, say yes.

Step 14: Select the option Restart now and check for abnormalities in the Windows Memory Diagnostic box.

Step 15: Once your operating system has rebooted, it will automatically check your system RAM and identify the possible causes of the Blue Screen of Death issue.

Step 16: Reboot your computer normally to implement the modifications and check if the Kernel security check failure issue still occurs.

Method 3: Examine the Memory Slot

One of the most common and straightforward causes of the problem is when the memory slot is not correctly seated in the socket. We recommend that you double-check that the memory slot is properly seated in the socket before using it.

If the issue appears to be recurring frequently, it’s not a bad idea to try replacing the memory slot or changing the slot in which it’s plugged into the motherboard.

Method 4: Check your hard drive

It is in your best interest to examine your hard drives on a regular basis to ensure that they are in good working order. Double-check that your hard disc is properly connected to the device. Whether you have a spare hard drive, you should try swapping it out to see if it starts up properly.

Additionally, restart your operating system to verify whether the Windows Kernel issue still appears. There’s no need to panic because we have a couple more methods to try.

Method 5: Make sure your computer is up to date.

Even if Windows Update has its own set of problems, it may also fix a lot of them. Working with the most recent version of Windows is always a smart idea if you want to take use of all of the system functions. As most of us are aware, Windows releases updates on a regular basis to improve system efficiency and address issues.

Now go to the Windows Update section to get the most recent version of Windows. Updates can be found by typing them into the search box at the bottom of the screen.

Check for any latest updates in the Windows Update section. Install them if they’re available.

Method 6: Scan your computer

Malware and other viruses do, in fact, cause a significant number of problems in the system. One of these is the failure of the Kernel Security Check. If a virus is discovered, we recommend that you run a thorough system scan as soon as possible to detect and remove it. To run a full system scan, you’ll need Windows Defender, Windows built-in antivirus, or third-party antivirus software, which are all equally effective.

To execute a complete system scan in Windows 10, follow the steps listed below in order:

Step 1: Go to the beginning. In the search box, type defender and push enter. To run Windows Defender, double-click on the choice.

Step 2: A number of icons are displayed for you in the left corner of the screen. To open the Virus and Threat Protection window, select the shield icon and click it.

Step 3: In the displayed window, select Advanced scan from the drop-down menu at the bottom.

Step 4: To execute a full system malware scan, check the full scan option.

It’s likely that the Windows Defender won’t be able to get rid of all of the malware it finds. In such circumstances, third-party antivirus software might be used to eradicate the malware. There are only a few applications on the market that operate well with Windows laptops. If you don’t have a specific application in mind, we recommend downloading Bitdefender, which is ranked as the finest antivirus in the world for protecting your computer.

To download Bitdefender, go to https://www.bitdefender.com.

If the error persists despite using a third-party antivirus, you may need to restore your operating system to a time before the problem occurred, or in the worst-case situation, reinstall your operating system.

Method 7: Inspect your hard drive for errors.

Step 1: To do a disc check, open command prompt on your Windows 10 PC.

Step 2: Go to Start and search for cmd in the search box. Choose Run as administrator from the right-click menu on the Command prompt option.

Step 3: On the command line, write ‘chkdsk C:/f command’ and press enter. If users do not wish to utilise C, they can choose their own hard disc partition.

Step 4: Keep in mind that you must type the command exactly as it is written. For example, if you enter the command without the /f parameter, chkdsk displays a notice indicating that a specific file needs to be repaired but does not correct the faults. The command chkdsk D:/f, on the other hand, will automatically detect and rectify any logical faults that are causing problems with your drives.

Step 5: Run the command chkdsk D:/r and hit enter at the same time to correct physical faults.

The main disadvantage of this procedure is that it takes time. It may take 1-2 hours to complete depending on the memory of your hard drive.

Method 8: Failure of the Kernel Security Check after an overclock

Some users have claimed that overclocking their PC caused them to experience the Kernel Security Check Failure error. If this is the case, restore your computer to its factory settings and delete any overclocking software you may have installed.

Finally, restart the system to have the modifications take effect and verify whether the error persists.

Method 9: Perform a System Restore.

Step 1: System Restore can help you undo a lot of the harm that has been done to your computer as a result of numerous faults. For example, if the primary cause of the issue is the installation of a new application/software. Then System Return will uninstall any recently installed software or drivers and restore your system to its previous state.

Step 2: Microsoft gives Windows users a special edge by allowing them to wipe the operating system using enhanced recovery options. The ‘Reset this PC’ option may also be useful.

Step 3: Navigate to Settings > Update & Security > Recovery in the left pane.

Step 4: Find the Get Started button under the Reset this PC option and touch it. Make the decision to save your files.

Method 10: Enable Safe Mode

Step 1: Most users avoid resetting their laptops because they are afraid of losing data. Whether you’re experiencing similar problems, try starting your computer in Safe Mode to see if any of your system apps or third-party applications and software are to blame.

Step 2: Go to https://Windowsreport.com/safe-mode/ and follow the step-by-step instructions to enable safe mode.

Step 3: If the error does not appear after starting your computer in safe mode, the problem was caused by an application or software.

Step 4: Open your task manager and enable your applications one by one to see which one is causing the problem. Uninstall it once you’ve found it.

Step 5: As we’ve seen, the procedures above will fix the Kernel Security Check Failure problem. However, if your system’s HDD or RAM has failed, we recommend that you replace it with a new one.